Versions

Changelog

• CHANGELOG.md

Guides

• Commandlist
• Configuration
• Range

Classes

• Channel
• DB
• Filter
• MPDException
• MphpD
• Output
• Partition
• Player
• Playlist
• Queue
• Socket
• Sticker
• Utils

Methods

• Channel::__construct - This class is not intended for direct usage.
• Channel::subscribe - Subscribe to the channel.
• Channel::unsubscribe - Unsubscribe the channel.
• Channel::read - Returns a list of the channel's messages.
• Channel::send - Send a message to the channel.
• DB::__construct - This class is not intended for direct usage.
• DB::albumart - Returns the albumart (binary!) for given song.
• DB::count - Counts the number of songs and their playtime matching the specified Filter.
• DB::fingerprint - Calculate the song's fingerprint
• DB::find - Case-sensitive search for songs matching Filter and return an array of associative array of found songs.
• DB::list - Lists unique tags values of the specified type. $type can be any tag supported by MPD.
• DB::ls - List files,directories and playlists in $uri
• DB::read_comments - Read "comments" from the specified file.
• DB::get_picture - Returns data and content of a picture embedded in $uri.
• DB::read_picture - Returns a picture of $uri by reading embedded pictures from binary tags.
• DB::search - Case-INsensitive search for matching songs and returns an array of associative arrays containing song information.
• DB::update - Update the Database and return the Job-ID.
• Filter::__construct - Creates a new filter.
• Filter::and - Used to chain multiple filters together with a logical AND.
• Filter::__toString - Generate and return the Filter string.
• MPDException::__construct
• MPDException::__toString - Returns all information as string
• MPDException::getCommand - Returns the command which caused the error.
• MPDException::getCommandlistNum - Returns the command's list-number in case a commandlist was used.
• MPDException::__wakeup
• MPDException::getMessage
• MPDException::getCode
• MPDException::getFile
• MPDException::getLine
• MPDException::getTrace
• MPDException::getPrevious
• MPDException::getTraceAsString
• MphpD::__construct
• MphpD::db - Return the DB instance
• MphpD::player - Return the Player instance
• MphpD::queue - Return the Queue instance
• MphpD::playlist - Returns a Playlist instance with the given name or null if the name is empty
• MphpD::playlists - Returns a list of playlists.
• MphpD::output - Return a new output instance
• MphpD::outputs - Returns an Array of associative arrays containing all available outputs
• MphpD::neighbors - Return neighbors on the network like available SMB servers
• MphpD::partition - Return a new Partition instance
• MphpD::partitions - Return a list of all available partitions
• MphpD::channel - Return a new Channel instance
• MphpD::channels - Return a list of available channels
• MphpD::clear_error - Clears the current error
• MphpD::status - Returns the value of the specified key(s) from MPD's status.
• MphpD::stats - Returns the value of the specified key from MPD's stats.
• MphpD::sticker - Returns a Sticker instance
• MphpD::mounts - Return a list of all mounts.
• MphpD::mount - Mount $uri to path
• MphpD::unmount - Unmount a path
• MphpD::bulk_start - Function to start a command-list.
• MphpD::bulk_end - Function to end a command-list and execute its commands.
• MphpD::bulk_abort - Function to abort the current command list.
• MphpD::bulk_add - Function to add a command to the bulk_list.
• MphpD::tagtypes - Return a list of all available tag types.
• MphpD::tagtypes_disable - Disable specified tag types.
• MphpD::tagtypes_enable - Enable specified tag types.
• MphpD::tagtypes_clear - Remove all tag types from responses.
• MphpD::tagtypes_all - Enable all available tag types.
• MphpD::ping - Ping.
• MphpD::config - Returns an associative array of configuration values.
• MphpD::commands - Returns a list of all available commands.
• MphpD::notcommands - Returns a list of all not-available commands.
• MphpD::urlhandlers - Returns a list of all available urlhandlers. Like smb://, sftp://, http://.
• MphpD::decoders - Returns a list of available decoder plugins and their supported suffixes and mimetypes.
• MphpD::cmd - Send $command with $params to the MPD server.
• MphpD::get_socket - Returns the socket resource.
• MphpD::get_version - Returns MPDs version as string
• MphpD::version_bte - Function to compare a given version string with the current version of MPD
• MphpD::idle - Waits until there is a noteworthy change in one or more of MPD’s subsystems.
• MphpD::close - Close the connection to the MPD socket
• MphpD::kill - Kill MPD.
• MphpD::get_binarylimit - Returns the current binarylimit
• MphpD::set_error - Function to set the last occurred error.
• MphpD::get_last_error - Return an array containing information about the last error.
• MphpD::connect - Initiate connection to MPD with the parameters given at instantiation.
• MphpD::disconnect - Disconnect from MPD
• Output::__construct - This class is not intended for direct usage.
• Output::disable - Disable the given output
• Output::enable - Enable the given output
• Output::toggle - Enable/Disable the given output depending on the current state.
• Output::set - Set a runtime attribute. Supported values can be retrieved from the MphpD::outputs() method.
• Partition::__construct - This class is not intended for direct usage.
• Partition::switch - Switch the client to the given partition
• Partition::create - Create a new partition with the given name.
• Partition::delete - Delete the given partition
• Partition::move_output - Move a specific output to the current partition
• Player::__construct - This class is not intended for direct usage.
• Player::consume - Enables/Disables the consume mode
• Player::crossfade - Sets crossfade to $seconds seconds.
• Player::mixramp_db - Sets the threshold at which songs will be overlapped.
• Player::mixramp_delay - Additional time subtracted from the overlap calculated by mixrampdb.
• Player::random - Specified if MPD should play the queue in random order
• Player::repeat - Specifies if MPD should start from the top again when reaching the end of the queue.
• Player::volume - Sets volume to $volume or returns the current volume if $volume is omitted.
• Player::single - Enables/Disables the single-mode. If enabled MPD will play the same song over and over.
• Player::replay_gain_mode - Specifies whether MPD shall adjust the volume of songs played using ReplayGain tags.
• Player::replay_gain_status - Get the current replay gain. Currently only the variable replay_gain_mode is returned by MPD.
• Player::current_song - Returns an associative array containing information about the currently playing song.
• Player::next - Plays the next song in the Queue
• Player::pause - Pause or resume playback.
• Player::play - Plays the song position $pos in the Queue
• Player::play_id - Begins playing the playlist at song $id
• Player::previous - Plays the previous song in the Queue
• Player::seek - Seeks to $seconds of song $songpos in the Queue.
• Player::seek_id - Seeks to $seconds of song $songid. Same as Player::seek() but with a song ID instead of a position.
• Player::seek_cur - Seeks to $seconds of the current song.
• Player::stop - Stops playing.
• Playlist::__construct - This class is not intended for direct usage.
• Playlist::exists - Function to determine if the specified playlist exists.
• Playlist::get_songs - Returns a list of all songs in the specified playlist.
• Playlist::load - Loads the specified playlist into the Queue.
• Playlist::add - Adds $uri to the specified playlist at position $pos.
• Playlist::add_search - Search for songs using Filter and add them into the Playlist at position $pos.
• Playlist::clear - Removes all songs from the specified playlist.
• Playlist::remove_song - Deletes $songpos from the specified playlist.
• Playlist::move_song - Moves the song at position $from in the specified playlist to the position $to.
• Playlist::rename - Renames the specified playlist to $new_name
• Playlist::delete - Removes the specified playlist from the playlist directory.
• Playlist::save - Saves the queue to the specified playlist in the playlist directory
• Queue::__construct - This class is not intended for direct usage.
• Queue::add - Adds the file $uri to the queue (directories add recursively). $uri can also be a single file.
• Queue::add_id - Adds a song to the playlist (non-recursive) and returns the song id.
• Queue::add_search - Same as search() but adds the songs into the Queue at position $pos.
• Queue::add_find - Same as find() but this adds the matching song to the Queue.
• Queue::clear - Clears the queue
• Queue::delete - Deletes a song or a range of songs from the queue
• Queue::delete_id - Deletes the song with ID $songid from the Queue
• Queue::move - Moves the song at $from to $to in the queue
• Queue::move_id - Moves the song with $from (songid) to $to (playlist index) in the queue.
• Queue::find - Same as Queue::search but case-sensitive
• Queue::get_id - Returns an associative arrays containing information about the song with ID $songid.
• Queue::get - Returns information about all or specific songs in the Queue.
• Queue::search - Search the queue for matching songs.
• Queue::changes - Returns an array of changed songs currently in the playlist since $version.
• Queue::prio - Sets the priority of given songs to $priority.
• Queue::prio_id - Sets the priority of Song ID $id to $priority.
• Queue::range_id - Set's the portion of the song that should be played.
• Queue::shuffle - Shuffle the Queue.
• Queue::swap - Swap two songs in Queue. By Position.
• Queue::swap_id - Swap two songs in Queue. By ID.
• Queue::add_tag_id - Adds a tag to the specified song
• Queue::clear_tag_id - Removes a tag from the specified song
• Socket::__construct
• Socket::cmd - Send $command with $params to the MPD server.
• Socket::get_socket - Returns the socket resource.
• Socket::get_version - Returns MPDs version as string
• Socket::version_bte - Function to compare a given version string with the current version of MPD
• Socket::idle - Waits until there is a noteworthy change in one or more of MPD’s subsystems.
• Socket::close - Close the connection to the MPD socket
• Socket::kill - Kill MPD.
• Socket::get_binarylimit - Returns the current binarylimit
• Socket::set_error - Function to set the last occurred error.
• Socket::get_last_error - Return an array containing information about the last error.
• Socket::connect - Initiate connection to MPD with the parameters given at instantiation.
• Socket::disconnect - Disconnect from MPD
• Sticker::__construct - This class is not intended for direct usage.
• Sticker::get - Returns the value of the specified sticker
• Sticker::set - Add a value to the specified sticker.
• Sticker::delete - Deletes the value from the specified sticker.
• Sticker::list - Returns an associative array containing sticker names and values of the specified object.
• Sticker::find - Search the sticker database for sticker with the specified name and/or value in the specified $uri
• Utils::escape_params - Function to parse an array of given parameters.
• Utils::pos_or_range - Function to "convert" int or array to a pos or range argument
• Utils::parse_error - Function to parse an MPD error string to an array